In the End it’s the Customer First
As you may know, we offer a turn-key solution which gives larger organisations confidence that we can get the job done well and in a timely fashion.
We are continually looking at areas of our business where we can make improvements to improve our performance. In the end improvements in performance mean added value for the customer and if we’re clever enough – making our job a tad easier.
And in today’s blog, it’s about an innovation in operations which saves us a lot of ball ache and allows us to go in and do a job and then leave with minimum fuss and nobody would ever know we were there!! – well not quite, but you’ll see what I mean in a mo.
Enter The Mud Slayer 350
Anybody who has ever drilled a borehole for a water well or for geothermal heating, will know that the site can easily get waterlogged and it’s a real arse to clean it all up. We have recently purchased a machine that has put an end to all o’ that! Shovels, foot valves, mud pans are all things of the past.
How Does It Work Then?
What you do is – using an auger, bore a 18″ hole of about 2ft in depth around where you’ll sink your rods. Drop your Mud Slayer pick-up pump into the side of it, and off you go. The pump sucks up all the water, mud and cuttings and takes it to the Mud Slayer machine itself, where the main work is done. Cuttings are separated out and the non-destructive mud and water is recirculated, recycled back into the drilling operation.
The Mud Slayer 350 holds – yes, you’ve guessed it, 350 gallons of water, which is all you need for medium to large drilling operations. This means that we often don’t need to rely on outside water sources, which again can be a problem. Any waste created is dumped in containers and disposed of off site.
Waterseekers Well Drilling Company Ltd
We hope you’ve enjoyed reading this article and look forward to hearing about your projects and discussing best solutions.
Please use the contact form, or call us direct on 01909 724286
Waterseekers Well Drilling Services Ltd.